Ceramic / Oxide powder
Ceramic / Oxide powderProven surfaces for many different applications
The uses for thermal sprayed ceramic materials is vast. To name just a few:
- Diesel engine pistons
- Automotive valves and cylinders
- Thermal barrier coatings for aircraft and industrial gas turbine combustion liners, blades, and vanes
- Electrolytes, interconnects, cathodes, and anodes for Solid Oxide Fuel Cells (SOFC)
- Anilox and corona rolls for the printing industry
- Calendar rollers, corrugating rollers, and doctor blades for paper manufacturing
- Oxygen sensors for select gas permeability
- Sputter targets used in Physical Vapor Deposition (PVD) coating applications
- Fiber and thread guides for textile manufacturing
- Biomedical implants
- Industrial applications such as metal casting troughs, hydraulic cylinders, and mechanical seals
| Chemistry | Grade | Flow Density | PAXTON | Size | Hardness | Application Data | |
| Ceramic/Oxide powder | |||||||
| Cr2O3 99.5% Fused & Crushed |
Cr2O3 99.5% Fused & Crushed |
212.147 212.145 212.102 212.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Hard，corrosion and wear resistant ceramic coatings Insoluble in acids, alkalis and alcohol Used for anilox rolls in printing machines, pump seals areas, wear rings, etc. |
|||
| Cr2O3-TiO2 75/25 Fused & Crushed |
Cr2O3-TiO2 75/25 Fused & Crushed |
215.147 215.145 215.102 215.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Lower hardness but better toughness than pure Cr2O3 coatings Used in wear applications where more toughness is needed |
|||
| ZrO2-Y2O3 93/7 Agglomerated & sintered |
ZrO2-Y2O3 93/7 Agglomerated & sintered |
237.147 237.145 237.102 237.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Used for thermal barrier coatings, protection of graphite sheets, etc. |
|||
| Al2O3 Fused & Crushed |
Al2O3 Fused & Crushed |
233.147 233.145 233.102 233.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Resistance againse corrosion, abrasion, erosion and sliding wear Excellent dielectric properties Stable in most acids and alkalis |
|||
| Cr2O3-TiO2-SiO2 92/3/5 Blended |
Cr2O3-TiO2-SiO2 92/3/5 Blended |
295.147 295.145 295.102 295.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Hard, dense and wear resistance coatings Good corrosion resistance Higher mechanical shock resistance than pore Cr2O3 |
|||
| Al2O3-TiO2 97/3 Fused & Crushed |
Al2O3-TiO2 97/3 Fused & Crushed |
252.147 252.145 252.102 252.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings Typical applications in textile machines for guiding and handing of thread, rolls in paper industry, etc. |
|||
| Al2O3-TiO2 20/80 Blended |
Al2O3-TiO2 20/80 Blended |
281.147 281.145 281.102 281.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Compared with Al2O3-TiO2(97/3) |
|||
| Al2O3-TiO2 60/40 Blended |
Al2O3-TiO2 60/40 Blended |
264.147 264.145 264.102 264.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Moderate wear resistance compared with Al2O3 or Al2O3-TiO2 Soluble in alkalis and sulfuric acid Decorative black coatings Slightly conductive |
|||
| TiO2 Fused & Crushed & black |
TiO2 Fused & Crushed & black |
221.147 221.145 221.102 221.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Moderate wear resistance compared with Al2O3 or Al2O3-TiO2 Soluble in alkalis and sulfuric acid Decorative black coatings Slightly conductive |
|||
| ZrO2-Y2O3 93/7 Fused and Crushed (White) |
ZrO2-Y2O3 93/7 Fused and Crushed (White) |
272.147 272.145 272.102 272.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Blocky particle shape For dense and vertically cracked coatings |
|||
| MgO-ZrO2 22/78 Fused and Crushed |
MgO-ZrO2 22/78 Fused and Crushed |
275.147 275.145 275.102 275.135 |
140-270mesh 15-45um 10-20um 10-35um |
APS Blocky Particle shape For dense and vertically cracked coatings |
|||
From Stock or Special Order - Any grade / Any Packaging.
If you are unable to locate a Chemical or Mineral you need, our sales department can custom source any needed materials for you directly.
