Sodium Humate

Category:

Sodium HumateCharacteristics

Sodium Humate is one kind of black amorphous particle, odorless, non-toxic ,non-corrosive and easily soluble in water.

Applications:

Widely sed as compound fertilizer in agriculture, feed additives in animal breeding, synergist in aquaculture; additive in ceramics, adjusting agents in drilling mud, industrial water stabilizer, cement decreasing water agents, detergents in boilers, ore flotation agents, wastewater treatment agents etc.

Specification:        

Item

HA-75

HA-65

HA-55

HA-40

HA content(dry basis)

≥75%

≥65.0%

≥55%

≥40%

Water insoluble matter(dry basis)

≤5%

≤10.0%

≤15.0%

≤15.0%

Moisture

≤15%

≤15.0%

≤15.0%

≤15.0%

PH

9-11

9-11

9-11

9-11

Size

0.2-1mm≥95%

20-120mesh

       20-120mesh       20-120mesh
Fe

≤4.5%

≤4.5%

≤4.5%

Sodium Humate  

can be used as liquefier in concrete. It not only reduces the consumption of concrete, but also improves its physico-mechanical properties. It also has a potential as a special density control additive (light weight) in cement or concrete. Due to its hydrophobic property, using Sodium Humate results in very little water uptake. This leads to either, a reduced use and an improved workability of the cement, or to an increase in its stability while the amount of cement used remains the same.

Sodium Humate helps to diminish the surface tension of water, resulting in an improved utilization of solid particles in concrete. It leads to a complete fine separation (dispersion) of the cement, whereby the friction between solid particles is reduced, resulting in a better versatility and workability of concrete.

Even though Sodium Humate is non-reactive with cement, some testing should be done prior to application.

Pack: 25kg woven  plastic bag with inner PE bag or according to customer’s requirement.

If you are unable to locate a Chemical or Mineral  you need, our sales department can custom source any needed materials for you directly